How to design vase walls for 3 lines with 0.42mm nozzle and no Arachne?
Weird changes in flowrate & speed on same type of layers
Outer Perimeter Slower Despite same speed setting
Small gaps in outer perimeter. Bambu Matte, 0.4mm Hardened Nozzle, Flow and K calibrated, 8h dried, 100mm/s 220°C, seam and surfaces perfect. What else can cause this issue guys?
Micro Z Banding perfectly spaced 2mm like the rods. Threaded rods are perfectly clean, no wobble and well lubed. Anyone with similar issue?
Extreme stringing after changed the hotend/nozzle
Stringing with hardened steel nozzle
Matte White Headache
New user with PLA Matte print issue...slow down the speed maybe?
Stringing even after drying filament
Why is this print fluffy?
is there an "interface shells" option in Orca Slicer?
Spiel wo man wirklich große Städte bauen kann?
K-Value clarification
Inconsistent outer walls
slicer adding solid infill where it shouldn't
My Preview is Blank/Black
Inconsistent extrusion after seam - BL P1S
Over extrusion of small infill areas only
Strange noise on first layer when retracting
Bambu Adaptive Meshing + Priming - Speed up the start of your prints!
Sunlu Marble is legit
My first space ship for Vulcanus + tips
2.0 made Kovarex enrichment so easy now
